As a follow-on to the Supermicro X8SIL-F review, I had some interest in seeing power consumption figures for the CPU’s involved. I have already discussed the Intel Core i3-530′s low idle power consumption and relatively low maximum power consumption extensively. As I have a habit of doing, I decided to use an Intel Xeon X3340 in the new server for two reasons. First, I wanted to see a performance of the X3440 versus the other CPU’s I have tested for video encoding and transcoding on a Windows Home Server platform. Second, I wanted to have a server running Microsoft Hyper-V Server with Windows Home Server and Ubuntu 10.04 as guest operating systems running in Hyper-V virtual machines. In the end, I found that the Xeon X3440 provides a great feature set, relatively low power consumption, and performance all at a reasonable cost.

Read the full story

To update to my review of the Supermicro X8SIL-F, I took some Kill-A-Watt power consumption numbers with the Supermicro X8SIL-F to answer a few questions regarding power consumption with real server hardware compared to consumer-level hardware. Below I am focusing on idle power consumption as with the Intel Core i3-530, Xeon X3440, and other LGA 1156 CPUs the CPU utilization while running a NAS application will be very low. After a bit of testing I found the i3-530 again leading the pack in idle power consumption and the Xeon X3440 turning in very respectable idle power consumption numbers.

Read the full story

After using one of the the lowest power AMD CPUs around, the Sempron 140 Sargas (single core) in a WHS, I decided to go to the other extreme and try a Phenom II X4 955 Black Edition. With the release of six core AMD CPU’s, and the existence of the Phenom II X4 965 Black Edition, the  Phenom II X4 BE chip is not the highest end AMD CPU out there. On the other hand, WHS is currently based on the older 32-bit Windows Server 2003 kernel, so it runs on dual core CPU’s just fine. The impending release of Windows Home Server V2 VAIL means that 64-bit will be the new requirement and a bit more power will be needed for future WHS systems. A quad core is overkill but a six core CPU is basically a waste for WHS. Luckily, with the Phenom II X4 955 BE’s unlocked multiplier, we can emulate a Phenom II X4 965 BE through a very mild overclock, and some other AMD CPUs as well. The following is a quick review of what I encountered with the Phenom II X4 955 BE, and how I managed to get the Phenom II X4 955 to boot using the PicoPSU (to get comparable idle power consumption figures).

Phenom II X4 955 Boxed

Read the full story