ServeTheHome.com

Intel’s 3400 chipset for its socket 1156 platform accepts CPU’s from the cheap Intel Pentium G6950 and Core i3-530 to the higher end Xeon X3430 to X3470 CPUs. Both Clarkdale and Lynnfield based CPU’s offer outstanding power consumption (for early 2010) at relatively low costs. After reviewing the Supermicro X8SIL-F, I purchased a competing (price wise) Intel motherboard to review, the Intel S3420GPLC. As I soon found, Intel also makes a good board, however it lacks some of the Supermicro’s features.

Read the full story

As I mentioned in the previous post on the compatibility issue, I had to RMA my Supermicro X8SIL-F (mATX LGA 1156 server board with IPMI 2.0 and dual Intel gigabit NICs) last week because it was version 1.01 PCB instead of v1.02. The difference being support for Clarkdale CPU’s.

Just to give an idea of why Supermicro’s support is so good here is the timeline:

1. Sunday (day 0) - Sent a note to Supermicro tech support explaining my problem.
2. Monday morning (day 1) - Received a confirmation that I needed v1.02 PCB of the X8SIL-F to use with my Intel Core i3-530.
3. Monday afternoon – submitted my RMA request online
4. Tuesday mid-day (day 2) - was contacted by Supermicro RMA support, I gave the requried information for advanced RMA. Later that day I got a follow-up e-mail saying that the advance RMA request had to be approved and that it may take until the next day.
5. Wednesday (day 3) – confirmed that I accepted the Supermicro advance RMA policy, and that ground shipping would be fine (I live only a few miles from a Supermicro facility).
6. Thursday (day 4) – New X8SIL-F shipped.
7. Friday (day 5) – X8SIL-F was at my doorstep. I was not home to sign for the delivery, so made arrangements to pick up at the UPS facility. Bottom line is that Supermicro had the replacement board at my doorstep within 96 hours of submitting my RMA request.

Overall great service from Supermicro! I have also decided that I will house this in the Norco RPC-4220 that serves as the DAS box for the Big WHS. That way I can use it to add drives for the test environments. Odds are I will either run ESXi with a few Linux/ FreeBSD/ OpenSolaris virtual machines or just run OSes directly on the PC. I am also planning to power this system independently of the rest of the enclosure and drives so that I can power cycle the server without taking the drives off of the Areca array.

Intel’s Clarkdale and H55/ H57 platforms are quite intriguing for several reasons. First, the performance is fairly good starting at 2.93ghz, and with hyperthreading, it is possible to get closer to a quad core performance in some tasks where multiple cores do well, such as video encoding. A second aspect is that Intel moved the IGP to an on package solution and really cut the power consumption/ heat dissipation of the platform. Finally, the cost of an i3-530 or i5-650 CPU plus a motherboard is often in the $200 or less range, making them quite affordable.

Two great uses for the chips are home servers and HTPC’s. Low power consumption and low heat generation ultimately enable lower acoustic signatures, as well as lower TCO through lower electric draw.

Core i5-650, Gigabyte H55M-UD2H, Dual Intel Pro/1000 GT PCI NICs

Read the full story