Posted on 06 January 2010. Tags: 1.5TB, Adaptec 31605, DDR3, Hot swap, Hotswap, Norco, Raid 1, Raid 5, SATA 2.0, Seagate, Seagate 7200.11, Server, The Big WHS (30+ Drives), WHS, Windows Home Server
First off, this is not a typical WHS build, and it was not meant to be. For the majority of users, a HP MediaSmart (by far the WHS to get if you do not DIY the build) is the way to go. For my purposes, I have seen a consistent, but increasing 500-600GB/mo of extra disk usage. Just for the record, unlike the opinion of certain Seagate executives, it is not for material of questionable moral value. Alas, I needed a solution that would allow me to have one box that could be upgraded and used for up to 24 months. As mentioned in Part 1, this project is an upgrade project and therefore I had some parts, and had a good idea of what I was doing before embarking on the project.
Read the full story
Posted in The Big WHS
Posted on 04 January 2010. Tags: 1.5TB, Adaptec 31605, Memory, Norco, Patriot, Raid 1, Raid 5, Raid 6, SATA 2.0, Seagate, Seagate 7200.11, The Big WHS (30+ Drives), WHS, Windows Home Server
About 10 months ago I decided to enter the world of the Windows Home Server. My storage arrays had outstripped my Cosmos S’s capacity, and running multiple controllers for all of the SAS drives as well as SATA storage became too much. My decision to build a WHS v. buy one was made due to sub-$100 Seagate 1.5TB 7200.11 drives (at the time very inexpensive) so I bought another eight drives just to fill up an 8 port raid controller.
Read the full story
Posted in The Big WHS