Posted on 20 May 2010. Tags: business storage, DDR3, dual nic, enormous benefit, eon zfs storage, expansion card, expansion slots, file server, flash drive, freenas, home server, home servers, htpc, intel xeon, internal usb header, motherboard, nics, Norco, openfiler, overclocking board, realtek nic, Review, server test, server v2, small business servers, storage drive, storage servers, Supermicro, Supermicro x8sil-f, test configuration, unraid, usb thumb drive, vail, virtual machine, WHS, Windows Home Server, windows home server v2 vail, x8sil-f, X8SIL-F v1.02
The Supermicro X8SIL-F motherboard is an excellent board for home and small business servers. When building a file server built upon Windows Home Server (V1 or V2 Vail) or another open source NAS project such as FreeNAS, Openfiler, EON ZFS storage, the Supermicro has a feature set that differentiates itself from both AMD and Intel based consumer-level motherboards. Compatibility with those operating systems and virtualization platforms such as Microsoft’s Hyper-V make the X8SIL-F a strong contender for a DIY storage or virtual machine server.
Read the full story
Posted in Motherboards
Posted on 14 May 2010. Tags: capacitors, Core i3, Core i5, expandability, home servers, hyperthreading, Intel, intel pentium, intel xeon, matx motherboard, network attached storage, pcb rev, physical differences, power combination, power consumption, processors, rev 1.01, rev 1.02, rma, Supermicro, supermicro motherboard, Supermicro x8sil-f, v1.01, v1.02, virtual machine, virtual machines, x8sil-f, X8SIL-F v1.02, xeon cpu
The Supermicro X8SIL-F mATX motherboard is becoming a favorite for home servers, especially those built upon Core i3′s and Core i5′s because it provides lots of expandability in a small form factor, and has IPMI 2.0. The Supermicro X8SIL-F’s supported processors can easily handle a network attached storage (NAS) virtual machine as well as additional virtual machines for other purposes. As I eluded to in my previous post, the major difference between the revision v1.01 and v1.02 boards, at least as far as I have seen, is the support for the Intel Core i3 and i5 CPU’s as well as the Intel Pentium G6950 in the v1.02 X8SIL-F versus support only for Intel CPU’s in v1.01. With the virtualization support and hyperthreading in the Intel Core i3 and i5′s as well as the low power consumption of Intel’s 32nm process, it is a great, low cost and low power combination.
Read the full story
Posted in Motherboards
Posted on 19 February 2010. Tags: Atom, Benchmark, clarkdale, Core i3, Core i5, energy saving, h55, h57, heat dissipation, home servers, hsf, htpc, hyperthreading, i3-530, i5-650, intel atom, intel pro, Low Power, matx motherboard, n330, NVIDIA, package solution, power consumption, Review, video encoding, WHS, Windows Home Server
Intel’s Clarkdale and H55/ H57 platforms are quite intriguing for several reasons. First, the performance is fairly good starting at 2.93ghz, and with hyperthreading, it is possible to get closer to a quad core performance in some tasks where multiple cores do well, such as video encoding. A second aspect is that Intel moved the IGP to an on package solution and really cut the power consumption/ heat dissipation of the platform. Finally, the cost of an i3-530 or i5-650 CPU plus a motherboard is often in the $200 or less range, making them quite affordable.
Two great uses for the chips are home servers and HTPC’s. Low power consumption and low heat generation ultimately enable lower acoustic signatures, as well as lower TCO through lower electric draw.

Core i5-650, Gigabyte H55M-UD2H, Dual Intel Pro/1000 GT PCI NICs
Read the full story
Posted in Low Power Servers, Server CPUs