ServeTheHome.com

To update to my review of the Supermicro X8SIL-F, I took some Kill-A-Watt power consumption numbers with the Supermicro X8SIL-F to answer a few questions regarding power consumption with real server hardware compared to consumer-level hardware. Below I am focusing on idle power consumption as with the Intel Core i3-530, Xeon X3440, and other LGA 1156 CPUs the CPU utilization while running a NAS application will be very low. After a bit of testing I found the i3-530 again leading the pack in idle power consumption and the Xeon X3440 turning in very respectable idle power consumption numbers.

Read the full story

Every so often a cool plug-in comes along that is a must have. I saw AdminiMe from ASoft recently on sale for $6 as a special and decided to give it a try. The plug-in is a fairly basic monitoring program which lets you see basic health stats of your Windows Home Server (WHS), send automated notifications when something goes awry, and do simple administrative tasks like launch the task manager, performance monitor, event viewer, initiate remote desktop connections, and even shut down/ reboot your Server remotely.   

Read the full story

In previous articles we have shown how to set up a basic Hyper-V virtual machine that works with FreeBSD and FreeNAS as well as how to configure the Hyper-V VM and boot FreeNAS in it. The next step of course is to install FreeNAS to a vhd, so it no longer needs to run off of the LiveCD. This is primarily important so you can configure FreeNAS and save that configuration through reboots. Also, as FreeNAS seems to only work with drives attached to the IDE controllers, installing FreeNAS to a vhd allows one to free up one IDE channel for another drive (by removing the default DVD drive).

Read the full story